RODDA PAINT CO -- ALL PURPOSE EQUIPMENT ENAMEL-WHITE -- 8010-00N086278 
=====================  Product Identification  =====================

Product ID:ALL PURPOSE EQUIPMENT ENAMEL-WHITE
MSDS Date:04/15/1992
FSC:8010
NIIN:00N086278
=== Responsible Party ===
Company Name:RODDA PAINT CO
Address:6932 MACADAM AVE
City:PORTLAND
State:OR
ZIP:97219
Country:US
Info Phone Num:503-645-5642
Emergency Phone Num:503-244-7512
CAGE:048H0
=== Contractor Identification ===
Company Name:RODDA PAINT CO
Address:6932 MACADAM AVE
Box:City:PORTLAND
State:OR
ZIP:97219
Country:US
Phone:503-244-7512
CAGE:048H0

=============  Composition/Information on Ingredients  =============

Ingred Name:MINERAL SPIRITS.  VP: 0.10 @ 68F.  LEL: 1.0%.
Fraction by Wt: 50-100%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:SOLVENT NAPHTHA, PETROLEUM, MEDIUM ALIPHATIC; (ALIPHATIC
    HYDROCARBON).  VP: 0.10 @ 68F.  LEL: 1.0%.
CAS:64742-88-7
Fraction by Wt: 10-15%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:VM & P NAPHTHA; (PETROLEUM DISTILLATE).  VP: 50 @ 68F. 
    LEL: 1.0%.
CAS:64742-89-8
Fraction by Wt: 0.5-5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:PIGMENTS
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES: CAN CAUSE IRRITATION, REDNESS,
    TEARING, BLURRED VISION. SKIN: PROLONGED OR REPEATED CONTACT CAN
    CAUSE MODERATE IRRITATION, DEFATTING, DERMATITIS. INHALATION:
    EXCESSIVE BREATHING OF VAPORS CAN CA USE NASAL AND RESPIRATORY
    IRRITATION, DIZZINESS, WEAKNESS, FATIGUE, NAUSEA, HEADACHE,
    POSSIBLE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: UNCONSCIOUSNESS AND EVEN
    ASPHYXIATION. INGESTION: CAN CAUSE GI IRRITATION, NAUSEA, VOMITING
    AND DIARRHEA. ASPIRATION OF MATERIAL INTO LUNGS CAN CAUSE CHEMICAL
    PENUMONITIS WHICH CAN BE FATAL.
Medical Cond Aggravated by Exposure:NONE KNOWN.

=======================  First Aid Measures  =======================

First Aid:SKIN: WASH EXPOSED AREA WITH SOAP AND WATER. EYES: FLUSH WITH
    LARGE AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. INGESTION: DO NOT
    INDUCE VOMITING - GET MEDICAL ATTENTION! INHALATION: IF AFFECTED,
    REMOVE  TO FRESH AIR. IF BREATHING IS DIFFICULT, ADMINISTER OXYGEN.
    IF BREATHING HAS STOPPED, GIVE ARTIFICIAL RESPIRATION. GET MEDICAL
    ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:>100F,>38C
Lower Limits:1.0%
Extinguishing Media:FOAM, ALCOHOL FOAM, CARBON DIOXIDE, DRY CHEMICAL,
    WATER FOG. BLANKET FIRE WITH ONE OF EXTINGUISHING MEDIA.
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP . FOR
    FIRES INVOLVING THIS MATL, DO NOT ENTER ANY ENCLOSED OR CONFINED
    FIRE SPACE W/OUT PROPER PROTECTIVE EQUIP.
Unusual Fire/Explosion Hazard:VAPS ARE HVR/AIR & MAY TRAVEL ALONG
    GROUND/BE MOVED BY VENT & IGNITED BY HEAT, PILOT LIGHTS, OTHER
    FLAMES & IGNIT SOURCES AT LOCATIONS DISTANT FROM MATL(SUPDAT)

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIM ALL IGNIT SOURCES (FLARES, FLAMES INCL
    PILOT LIGHTS & ELEC SPKS). PERS NOT WEARING PROT EQUIP SHOULD BE
    EXCLUDED FROM SPILL AREA UNTIL CLEAN-UP COMPLETED. STOP SPILL AT
    SOURCE, DIKE AREA OF SPILL	TO PVNT SPREADING, PUMP LIQ TO
    SALVAGE(SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL, DRY AREA. KEEP AWAY
    FROM HEAT, SPARKS & OPEN FLAME. KEEP CNTNRS CLOSED WHEN NOT IN USE.
    USE ONLY W/ADEQUATE VENTILATION.
Other Precautions:CONTAINERS OF THIS MATL MAY BE HAZARDOUS WHEN
    EMPTIED. SINCE EMPTIED CONTAINERS RETAIN PROD RESIDUES (VAPOR,
    LIQUID &/OR SOLID), ALL HAZARD PRECAUTIONS GIVEN IN THIS DATA SHEET
    MUST BE OBSERVED. READ  & OBSERVE ALL PRECS ON PROD LABEL!

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF TLV OF PROD/ANY COMPONENT IS EXCEEDED NIOSH
    APPRVD SCBA W/FULL FACE PIECE OPERATED IN PRESS DEMAND/OTHER POS
    PRESS MODE IS ADVISED; HOWEVER, OSHA REGS ALSO PERMIT OTHER NIOSH
    APPRVD RESPS UNDER SPE CIFIED CNDTNS (SEE SFTY EQUIP SUPPLIER).
Ventilation:PROVIDE SUFFICIENT MECHANICAL AND/OR LOCAL EXHAUST TO
    MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:RESISTANT GLOVES SUCH AS BUNA-N.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER . TO
    PREVENT RPTD/PRLNGD SKIN CONTACT, WEAR IMPERVIOUS CLOTHING & BOOTS.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING WASHROOM.
Supplemental Safety and Health
EXPLO HAZ: HNDLG POINT. NEVER USE WELDING/CUTTING TORCH ON/NEAR DRUM
    (EVEN EMPTY) BECAUSE PROD (JUST RESIDUE) CAN IGNITE EXPLOSIVELY!
    SPILL PROC: TANK. REMAINING LIQ MAY BE TAKEN UP ON SAND, CLAY, EAR
    TH, FLOOR ABSORB OR OTHER ABSORB MATL &SHOVELED INTO CNTNRS. PVNT
    RUN-OFF TO SEWERS, STREAMS/OTHER BODIES OF WATER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>203F,>95C
Vapor Pres:50
Vapor Density:HVR/AIR
Spec Gravity:1.15 
Evaporation Rate & Reference:FASTER THAN BUTYL ACETATE
Appearance and Odor:WHITE LIQUID.
Percent Volatiles by Volume:59.90

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS (NITRIC ACID, PERMANGANATES, MEK PEROXIDE,
    ETC).
Stability Condition to Avoid:EXCESSIVE TEMPERATURES.
Hazardous Decomposition Products:NORMAL COMBUSTION FORMS CARBON
    DIOXIDE, WATER VAPOR; INCOMPLETE COMBUSTION CAN PRODUCE CARBON
    MONOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DESTROY BY LIQUID INCINERATION. MATERIAL
    COLLECTED ON ABSORBENT MATERIAL MAY BE DEPOSITED IN AN APPROVED
    TOXIC SUBSTANCE LANDFILL IN ACCORDANCE WITH LOCAL, STATE AND
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.